PRODUCTS

EZTRIM Satellite - Wet/Dry Trimmer

$10,495

• 24" diameter drum
• Assembled dimensions with tables out – H 48", W 64", D 29"
• Carrying case dimensions – H 27" Diameter 27"
• Only weighs 105 lbs
• 10-20 lbs / hour (wet trimming, in wet weight) | 20-30 lbs / hour (dry trimming, in dry weight)

The Satellite is hands down the best commercial bud trimmer on the market. This dual action trimmer, trims WET and DRY at no additional cost. Not only does it provide a better quality trim than any tunnel trimmer but it is faster, quieter and triple filters your by-product for processing.

VIEW SATELLITE COST/BENEFIT ANALYSIS

EZTRIM Satellite SL - Wet/Dry Trimmer

$8,495

• 24" diameter drum
• Assembled dimensions – H 45", W 29", D 29"
• Only 85 lbs
• 10-20 lbs / hour (wet trimming, in wet weight) | 20-30 lbs / hour (dry trimming, in dry weight)

Differences between Satellite and Satellite SL: SL does not come with side tables, speakers or transport bag. The Satellite SL is hands down the best commercial bud trimmer on the market. This dual action trimmer, trims WET and DRY at no additional cost. Not only does it provide a better quality trim than any tunnel trimmer but it is faster, quieter and triple filters your by-product for processing.

VIEW SATELLITE (SL) COST/BENEFIT ANALYSIS

EZTRIM Wander Trimmer

$1,495

• Comes in 20" x 10" x 10" toolbox
• Weighs only 20 lbs
• 1 lb / hour (dry weight)

The Wander Trimmer provides the perfect combination of mechanical efficiency and personal touch. The Wander Trimmer will save 60-80 percent of your time, does NO DAMAGE to your flowers, collects all of your clipped leaf for processing and allows you to hang-dry your plants.

 

EZPROCESS Rosin Press

$2,995

• The heat plate is 3” x 12” 76.2mm x 304.8mm
• Assembled dimensions – L 26" W 19.5" H 48.5"
• Only 100 lbs
• 1 lb / hour finished product up to 60% yields

VIEW EZ PRESS PRO COST/BENEFIT ANALYSIS

EZTRIM's EZ Press uses heat and pressure for extraction that enables up to 60% yields. You can press your flowers, kief, leaf, and bubble hash. No need for butane, co2, purging or heavy equipment that is dangerous to use.

EZ Press is the world's best rosin press. The EZ Press has 2 heat plates that are individually controlled with a thermocouple and controller. The EZ Press is a manual press. The benefit of pressing manually is that it allows you to control the amount of pressure over time. We have found that pneumatic pressing tends to press to quickly, causing blown out tubes and lower yields. The EZ Press was also designed to get the rosin off the heat as quickly as possible to avoid burning the product. The micron tubes are exactly the same width and length of the heat plates. This forces the product off of the heat as soon as you squish. The EZ Press can press over 1 oz of product at a time and can create up to 60% yields. The Ez Press also has the most pressure on the market at a true 12 tons.

The EZ Press comes with everything needed to start pressing rosin today. This includes: stand, press, micron tubes, heat plates and 2x digital thermostat controllers.

 

EZPREP DeBudder

$3995

• Assembled dimensions – L 15” W 23” H 44”
• Weighs only 150 lbs
• 120VAC 60HZ 15AMP

The Debudder gently and quickly plucks your buds from the stem. The Debudder can remove the buds from the stem in a fraction of the time a person can, with no damage to the flowers. There are no frayed ends to worry about as the Debudder picks the bud right next to the base of the bud. The Debudder is the perfect piece of equipment to utilize in the harvesting process and is meant to compliment the Satellite. Now only 1-3 people are needed for harvesting.

 

EZPREP Bud Sorter

$3995

• Assembled dimensions – L 82” W 25” H 45+”
• Weighs 122 lbs

• NO POWER

The new and improved 2018 model of the Bud Sorter from EZTRIM is being released in early January and no longer requires any power! This sorter will separate your buds into different sizes at a high rate of speed with no damage to the buds. Minimal effort from an untrained operator will allow you to sort over a pound in under a minute. Separate your leaf, isolate your big buds, sort before trimming with the Satellite, or speed up pre-packaging at dispensaries.

 

EZPROCESS Dry Sifter

$995

• Capacity – 4 lbs
• Comes with 7 different bags from 45 - 220 microns and also a classifier bag
• Extremely Durable
• L 15” W 15” H 30”
• Weighs only 40 lbs
• Easy to load and remove
• Up to 30% yields

The EZ Sift from EZTRIM is the best pollinator and kief sifter on the market. The EZ Sift kief sifter has the ability to hold 4 pounds of trim, is extremely durable and comes with 8 bubble bags with micron counts ranging from 25 - 220. The EZ Sift kief sifter is far superior to the drum style sifters on the market. It can sift in 1 hour what it takes other products to do in 7 hours and additionally gives you various grades of kief for processing.

 

EZ Plant Trainer

$100

One standard set of the EZ Plant Trainer will allow you to grow a 4’ tall and 4’ wide plant, or any similar variation, all with ease and functionality that you’ve never experienced before. With the patent pending design, you can easily click the pieces together as your plant grows to train them to grow the way you want. Then, as they get bigger continue to build the structure and support your growing plants all the way through it’s life cycle.

 

 

 

 

EZCURE Cabinet

TBD around $8500

• Assembled dimensions – TBD about 5' x 3' x 6'
• Weight - TBD about 100lbs
• Power - TBD 110v

EZTRIM is developing a new cure cabinet that will be able to perform heating, cooling, humidifying, and dehumidifying functions without introducing outside air. We are aiming to be able to hold 50lbs of dry weight. A discounted presale will begin in early January following the release of more information and images. This product is expected to be released before the end of January.

 

EZCURE CureCork™

$299

EZCURE CureCork™ is the world’s first and only automated and fully programmable herb aerator. Cure your herbs with ease! Fits onto any Jar or Container from 32 oz to 5 Gallons.

 

 

 

 

EZPACKAGE Weigher - Multi-Head Weighing System by Paxiom

$75,000

The EZPACKAGE Weigher by Paxiom is Part of the Primo Combi weighing/packing system. It is designed for high performance applications requiring increased production rates and tight accuracy tolerances. We have engineered the EZ Weigher to challenge the norms and raise the bar by offering industry leading mechanical and software features. To purchase or for more details call 1-888-812-9931.

 

 

 

 

EZPACKAGE Conveyor - Packaging Conveyor Belt by Paxiom

$160,000 (includes shipping, installation and training)

The EZPACKAGE Conveyor is part of the Primo Combi weighing/packing system. These conveyors are complete with controls that interface easily with ancillary machines to assure no-container no-fill operation and to optimize cycle speed with real time communication between machines and are easy to integrate, clean, and service. Designed for applications that require filling over 30 cycles per minute. To purchase or for more details call 1-888-812-9931.

 

 

 

 

Mailing Address

EZTRIM
P.O. Box 1539
Broomfield, CO 80038

Physical Address

EZTRIM
2400 Industrial Ln Suite 1500 Broomfield, CO 80020


GET IN TOUCH


Please be sure to enter a valid email address and completely fill out the form. All * fields are required to properly send the form.

Disclaimer


All products manufactured and/or sold by EZTRIM are intended to be used in accordance with all existing laws and regulations. Neither the manufacturer, its employees, nor its affiliates condone or promote in any way any use of their equipment that may be deemed illegal by any presiding or jurisdictional laws. The manufacturer does not accept any liability or responsibility for damage caused to or by any product as a result of inadequate use or assembly. Read user’s manual, including all warnings or restrictions, before operating or using any equipment. EZTRIM does not accept returns and does not provide refunds. All sales are final.